PD2121 - RF Power Splitter, Combiner, Divider
IP67 Outdoor, 2 Way, SMA, 698 - 2700 MHz, 50 Ohm
Features & Benefits
PD2121 is an outdoor, waterproof and weather resistant, IP67 rated, 2 way, 50 ohm, broadband RF power divider, power combiner furnished with SMA female coaxial connectors. All wireless band frequencies in the range from 698 to 2700 MHz are covered with best in class RF performance. Max microwave input power levels to 40 watts can be handled in both power splitter and power combiner applications. See 2 way power divider input rating tables for more info.
The heart of the unit is a precision designed and etched Wilkinson type microstrip circuit on a low loss, high frequency, dielectric substrate. The Wilkinson microstrip circuit passes DC current to all ports making it ideal for use in active systems. Power splitter dividers passing DC to select ports and blocking DC to others are also available. See options (right). Electrical performance is highlighted by 0.4 dB max insertion loss (above the -3.01 dB power split), 22 dB min isolation, 1.20:1 max input VSWR and 1.15:1 max output VSWR. Equal power split and balance is displayed by 0.2 dB max amplitude balance and 2 degrees max phase balance. Narrow band RF performance over your frequency range may be even better. See 2 way power divider test sweeps for specific details.
Mechanical features include precision CNC, brass, 50 ohm SMA female coaxial connectors with tri alloy plating to insure tarnish resistance and low PIM operation. Connector pins are gold plated phosphor bronze for reliability and low contact resistance. Virgin electrical grade PTFE support insulators captivate the contact pins enabling trouble free coaxial connector mating. Long term operation and superior shielding is assured by the
Exteror housing dimensions are 2.28" wide by 2.28" deep by 1.00" high (57.9 x 57.9 x 25.4 mm). SMA female (jack) connectors extend 0.44" (11.1 mm) from the housing. Operating temperature range is from -65°C to +85°C. Weight is 228 grams. Rated for continuous water and weather resistant exterior use. May also be used indoors. See 2 way power divider outline drawing for more details.
The PD2121, IP67 weatherproof, two way, SMA female, RF power divider (splitter) combiner is ideal for a broad range of outdoor wireless radio frequency microwave applications on both transmit and receive sides, ranging from amplifier sharing & receiver combining to antenna splitting, and is deployed world wide in networks encompassing 700 MHz Public Safety Band, 800 MHz cellular, GSM 850, 900, 1800 & 1900, PCS 1900, 1 GHz to 2 GHz L-Band, GPS, W-CDMA-3G, UMTS, TETRA, RFID, IEEE802.11b/g, 2.45 GHz ISM, Wi Fi and 2.3 GHz & 2.5 GHz WiMAX.
Options / New IP67 Models
Indoor Model : An indoor version of this two (2) way power combiner divider is available with RoHS construction. PD2120
DC Blocking: Two DC blocking versions of this IP67 outdoor 2way divider combiner:
PD5121: DC pass one port, DC block other port. Typically used for powering an active antenna through the DC pass port of the IP67 RF power divider splitter.
PD5123: DC block 2 ports. Typically used in combining applications to prevent passing DC current to sum or other port.
GPS Splitter: 2-way GPS antenna signal splitter covering L1, L2, GLONASS and Galileo GNSS global navigation satellite system positioning frequency bands.
GPS211: Two way GPS signal splitter, DC pass one port - providing a means to power an active GPS antenna - other port DC blocked and furnished with a 200 ohm internal load to simulate antenna preamp current draw, thus preventing the GPS receiver from sensing antenna fault.